|
|
Acupuncture Tools & Supplies
Healing Lamp carries a line of
excellent, affordable commercial acupuncture products & supplies at the best prices
you'll find anywhere. |
MicroCare Tech Acupuncture Pen┐
Class IIIa Laser Pen┐
Acu Machine - 4 Output┐
Acu Machine - 6 Output┐
Acu
Navigator┐
Digital
Electro Acupunctoscope┐
Electro-Acupuncture Machine┐
ES-130 Electro-Acupuncture
Device┐
WQ-10D1
Electro-Acupuncture Machine┐
Pointer
Plus Excel II┐
Point Select (Replaced Stim Plus)┐
Acu-Treat┐ |
|
|
Hottest Most Popular
New Item!
MicroCare Tech AcuPen
Acupuncture,
Acupressure and Skincare
AcuPen is a
dual-purpose handheld device for both clinic and
personal healthcare use that provides acupoint location
as well as electrical micro current therapy. It applies
a painless stimulation to perform electro acupuncture
including auricular and hand acupuncture, acupressure
and skin rejuvenation (cosmetic and anti-aging
acupuncture). No piercing of the skin is required . . .
read more»
Features at a glance:
1. Audio & Visual
(LED) Acupoint Detection Indicator
2. Audio & Visual (LED) Intensity Indicator
3. Intensity adjustable at any time
4. Timer to adjust treatment duration
5. Micro current therapy
6. Absolutely safe, and easy to use
7. Compact & light to carry
8. Micro-computer maneuvered
9. 2 x 3CR2032 batteries included
10. CE mark and ISO 9002 Certified
|
|

<click> to
enlarge»
Just
$65
+ shipping*
|
|
|
Newest
Laser Pen in stock
Laser Pen -
Class IIIa, hi-tech, pro dual featured, 5 mW with solid
state diode
Acupuncture
Stimulator
Our newest laser pen
Class
IIIa, professional, hi-tech,
dual featured, 5 mW laser
pen with solid state diode.
Both continuous and pulsed mode (2
Hz) are offered in the same unit. The unit is
operated by a one button "push" control feature allowing
for quick transition from continuous to pulsed mode. The
button close to the aperture gives a continuous mode
laser beam while the button close to the pocket clip
gives a pulsed mode laser beam. The unit will project a
visible, coherent, bright red 670nm infrared laser beam
65 feet in a well lit room (300 feet in a dark room).
Compact, lightweight and
ergonomically shaped for easy and accurate use.
Unit includes a black nylon travel case with Velcro
enclosure. Measures 5 in x 1.2in x 0.8in and weighs 2.2
oz.(unit only with
batteries). Uses 2 standard AAA 1.5 volt batteries
(included).
Note:
Because the unit is operated by push button control, the
user must push and hold the button to use continuously
in either mode.
Caution:
Laser
Radiation. Avoid Direct Eye Exposure. |

Our Price:
$160
+ shipping*
|
|
Acu Machine - 4 Output
plus Point Locator & More
Best Selling Worldwide
The all new and improved Acu
Machine features an indicator for sound and luminescent
state, a timing switch, a power voltmeter, a music
device playing when the treatment is over or before it
starts and an operating output protection.
Features:
-
The output pulse
waves of the machine are in low voltage, low
frequency.
-
There are five
types of pulse waves to be selected:
continuous wave, dense-disperse wave,
intermittent wave, ripple wave and
respiration wave
-
Four kinds of
wave combinations can be used at the same
time, separately, or get the two output or
more crossed to use.
Technical
data:
-
Continuous wave:
pulse duration = 0.5ms; repeated pulse
frequency: f1=1Hz – 100Hz.
-
Dense-disperse
wave: Dense-disperse wave displays
alternatively, disperse frequency is f1 same
as base wave; dense frequency is about
100Hz; pulse duration is 0.5ms; FREQ2
regulates the frequency f2 of 10-40 cycles
per minute.
-
Intermittent
wave: Pulse shows at regular interval at a
frequency of 10-40 cycles per minute.
-
Ripple wave: Its
amplitude increases to maximum and drops
suddenly, and repeats the process.
-
Respiration
wave: Its amplitude increases first, then
drops quickly to zero, and repeats this
process.
-
Ripple wave: Its
amplitude increases to maximum and drops
suddenly, and repeats the process
808-II comes with 4
outputs, 8 wire clips that can be used on 8
acupoints at the same time. |
|

<click> to enlarge»
Our Price:
$139
+ shipping*
ISO
9001/2000 Certified!
Size: 8.5”L
x 6.5”W x 3.0”H
Weight: 3.3
lbs
Accessories:
1 - Acupoints Detecting
Probe
4 wires, with
8 alligator clips
8 electrodes
4 self-adhesive patches
1 adaptor |
|
|
Acu Machine - 6 Output
plus Point Locator & More
Best Selling WorldwideThe all new and
improved Acu Machine features an indicator for sound and
luminescent state, a timing switch, a power voltmeter
and an operating output protection.
Features:
-
The output pulse
waves of the machine are in low voltage and
low frequency. There are five types of pulse
waves to be selected. Continuous wave,
dense-disperse wave, intermittent wave,
ripple wave and respiration wave.
-
Four kinds of
wave combinations can be used at the same
time, separately and get the two output or
more crossed to use.
Technical
data:
-
Continuous wave:
pulse duration = 0.5ms; repeated pulse
frequency: f1=1Hz – 100Hz.
-
Dense-disperse
wave: Dense-disperse wave displays
alternatively, disperse frequency is f1 same
as base wave; dense frequency is about
100Hz; pulse duration is 0.5ms; FREQ2
regulates the frequency f2 of 10-40 cycles
per minute.
-
Intermittent
wave: Pulse shows at regular interval at a
frequency of 10-40 cycles per minute.
-
Ripple wave: Its
amplitude increases to maximum and drops
suddenly, and repeats the process.
-
Respiration
wave: Its amplitude increases first, then
drops quickly to zero, and repeats this
process.
KWD 808-I comes with
6 outputs, 8 wires with alligator clips that can
be used on 8 acupoints individually or all
together at the same time to apply acupuncture
needle treatment; and it is also equipped with 4
self-adhesive electrodes that can be used to
apply electrical stimulation without using
acupuncture needles.
Note: D/C
(9 V) is accessible with 6 x “C” CR14 UM2
Batteries (not included). |
|

<click> to
enlarge»
Our Price:
$154
+ shipping*
ISO 9001/2000 Certified!
Size: 8.5”L x 6.5”W x 3.0”H
Weight: 3.3 lbs
Accessories:
1 Acupoints Detecting Probe
8 wires, with
8 alligator clips
8 electrodes
4 self-adhesive patches
1 User’s Manual
1 acupuncture meridians and
acupoints chart
1 A/C adaptor for both 110V &
220V |
|
|
Acu Navigator - Detecting through
the Hand and Treating the Body
A Have-to-Have Tool
acupuncture made easy
Traditional Chinese Medicine
believes that, if a condition manifests inside the body,
the signs of that condition will also manifest outside
the body. If the Chi (body’s own energy) flows inside
the body, there will be no pain. If the Chi is blocked,
there will be pain. The Chinese health researchers have
found that the internal organs will reflect the
state-of-Chi (flow or block) to the acupuncture points
on the skin from the meridians and the collateral
channels through different sensations under the same
electric current. They also found that the acupuncture
points on the hands are typically an excellent area of
the body to observe the state-of-Chi.
Acu-Navigator
is innovated on the basis of the above universal TCM
theory and has put those principles into clinical
practice. It is a quite accurate, indispensable, yet
affordable machine which has made the four TCM
techniques “Observation, Auscultation, Inquiry and
Palpation” easy to learn and master.
Acu-Navigator
is a unique electronic detecting tool that locates Chi
blocks by using a Detecting Probe to check the
acupuncture points on the hands. It is also a treating
tool that clears those blocks by using Electricity,
Magnetism, Sound and Light! Easy, safe and convenient to
learn and operate, the Acu-Navigator is an essential
tool and a must for acupuncturists, chiropractors,
physical therapists, massage practitioners and TCM
students.
|
Main Features:
-
Quickly select
the Palm Lines
-
Easily
Identifies the Five Body Systems
-
Uses
Electricity, Magnetism, Sound and Light
Major Technical
Data:
-
Voltage: 3 V.D.C
(D Battery x 2)
-
Pulse Frequency:
0.4 – 0.8 KHz
-
Voltage Range of
Pulse: 0.1 V. – 6 V.
-
Output Load: 500
ohms
-
Voltage
(Unloaded-Peak Value): < 500 V
-
Pulse Output
(Maximum) > 7 uC
-
Pulse Energy
(Maximum – Single Pulse): < 30 mJ
-
Size: 16” L. x
11” W. x 4” H.
-
Weight: 7 lbs
Caution: These
statements have not been evaluated by the Food
and Drug Administration. This product is not
intended to diagnose, cure, treat or prevent any
disease. |
|

<click> to
enlarge»
$395
+ shipping*
Accessories:
1 Detecting Probe
1
Treating Probe (rubber-tipped)
1
Small Sensor
4
Adhesive Electrodes
2
D Batteries
1
Hand Acupoint Chart
1
User’s Instruction Manual
|
|
|
Digital
Electro Acupunctoscope (Model AWQ-104L)
5 Output Channels
The AWQ-104L is the latest improved version of
the multipurpose WQ-10 electro-therapy series from China,
now with 4 outputs and large 0.5" x 0.9" LCD digital meter
which displays both frequency and point location.
The AWQ-104L is able to display and fine tune frequency
selection through two separate ranges: 1 to 100 Hz (Low) and
10 to 1,000 Hz (High). When in point location mode (Loc), a
relative digital reading from 1 to 150 (for the point being
measured) is also displayed on this same meter. Location is
also indicated by sound and light.
Unit also features: 4 independently controlled output
channels which provide stimulation to 8 needles, polarity
reversal [i.e. tonification (-) and sedation (+)] switches
for each channel, Hi/Low voltage switch, and 2 frequency
ranges (X1, X10). New integrated circuitry assures no
interference or crossover. The AWQ-104L is also capable of
delivering micro-current when the intensity is set just
below the sensorial threshold level.
Powered by 9 volt battery. The "Loc" or "Stim" settings
allow the hand held probe to either locate or treat points.
The output and polarity of this hand probe are both
regulated by Intensity Dial 1. Three adjustable pulse modes
are also offered: continuous, intermittent (discontinuous),
and dense-disperse.
Accessories include 5" long pen shaped search/treat probe
with hand ground pole and wire, 4 sets of alligator clip
wires, sturdy carrying case, 9 volt battery, and
instructions. 1 year warranty from date of purchase.
|
Specifications |
500 ohm test load |
|
Output channels |
5 (1 hand probe, 4 intensity
channels) |
|
Frequency meter |
LCD, 0.5" x 0.9" |
|
X1 |
1 to 100 Hz |
|
X10 |
10 to 999 Hz |
|
Frequency light |
green LED light |
|
Volts & current |
|
|
Low |
0 to 9 volts, 0 to 18 mA |
|
High |
0 to 20 volts, 0 to 40 mA |
|
Pulse width |
|
|
X1 |
320 microseconds (µS) |
|
X10 |
32 microseconds (µS) |
|
Pulse shape |
asymmetric biphasic square wave
with negative spike |
|
Pulse modes |
continuous, intermittent
(discontinuous), or dense-disperse (rate modulation) |
|
Skin impedance monitoring |
meter displays value 1 to 100 or
150, green LED light, and sound |
|
Polarity reversal |
+ / - switches for each channel |
|
Power source |
one 9 volt battery |
|
Low power indication |
yellow LED light |
|
Size, wt, color |
6" x 4.2" x 2.2", 330 gm, gray |
|

<click> to
enlarge»
Our Price:
$199
+ shipping*
|
|
Electro-Acupuncture Machine
Model
WQ-10D1
The Multiple Electronic
Acupunctoscope
(MEA), Model WQ-10D1 is an
instrument used both as a detector
of acupuncture points and as an
electrical stimulator for
acupuncture therapy and anesthesia.
The WQ-10D1 model is a newly
modified unit from the older WQ-10
series
acupunctoscope,
featuring a CA (constant
amplitude)-AM (amplitude modulation)
selecting switch to allow it to
discharge six different combinations
of wave patterns.
I. Frequency f(c/s) 0~100 / Width T
(µs) 250 ~ 400:
The
adjustment of the stimulating wave
forms and frequencies.
They are controlled by
following knobs
and switch: F1=fixed frequencies,
F2=variable frequencies, CA
(constant amplitude) -AM
(amplitude modulation) selecting
switch, CA (constant amplitude)-AM
(amplitude modulation) selecting
switch. There are six different
forms of combinations by using f1
and f2 CA-AM
1. When f2 is at 0, by adjusting f1,
a continuous (CA) or rise-fall (AM)
wave is obtained.
2. When f1 is at 0, by adjusting f2,
an intermittent (CA) or saw tooth
(AM) wave is obtained.
3. By adjusting f1 and f2, but keep
f1<f2, a composite wave of
alternating frequencies f1 and f2 a
dense – disperse (CA) or rise dense-
fall disperse (AM) wave is obtained.
II. Acupuncture therapy and
anesthesia:
1. Set
“Intensity” knob to zero and “E-E or
APD” switch to “1.2.3”, set “Hi-Lo”
switch to “Hi” or “Lo” position as
required. Intensity of “Lo” position
is 1/3 of “Hi”.
2.
Plug output leads into 1.2.3
sockets,
then
fasten their clips to the handles of
the needles.
3. Set
the desirable waveforms and
frequencies with knobs f1, f2 and K.
4.
Turn “on” main switch
5.
Adjust intensity to appropriate
degree
III. Therapy with Electric,
Excitatory (E-E) and skin sure face
acupuncture point stimulation:
1. Use output leads with banana
plugs. Connect the bananas plugs
with probes provided with cup shaped
electrodes at terminal ends. Fill
the cup with absorbent cotton soaked
with salt solution. Fix the cup
electrode onto the acupuncture
points or the other selected parts
of the skin. Set “Hi-Lo” switch to
“Hi” position.
2. In case of weak stimulation
follow the same steps described in
II. Plug output leads into 1.2.3
sockets.
3. For strong stimulation, the
output will be taken from the “E-E
or APD” socket, which is specially
designed for this purpose. Set” E-E
or APD” switch to “E-E1+2+3”
position and intensity is regulated
by 1.2.3 channels together.
IV.
Multiple usages:
-
The section used for acupuncture
point detection can also be used
for locating the
auriculo-acupuncture
points, meridian points, and
band of (?) zone of acupuncture
points.
-
The section used for stimulation
can also be used for acupuncture
therapy, skin surface
acupuncture point stimulation,
electrical Ti-Needle,
acupuncture anesthesia, therapy
by electric excitation, and
measuring the sensitivity of
meridian. Both A and B sections
maybe used at the same time.
-
Multiple transmit messages:
The
instrument can transmit three
waveforms of impulse series. Their
frequency varies from 0-
100 C/S, with
several adjustment combinations.
By varying the combinations of these
differing massage
types, a large number of stimulating
conditions may be derived in order
to prevent repetitious
overuse, enhancing therapeutic
efficiency.
-
High intensity of output:
divided into "High" and "Low"
two ranges, smooth adjustment,
high stability and low power
consumption.
-
Detecting acupuncture points
with accuracy and without
producing pain sensation. After
the location of point,
stimulating pulses can also
provide therapy from the
detecting probe.
|

<click> to
enlarge»
$149
+ shipping*
Accessories:
-
Output leads with clips (3 sets)
-
Output leads with banana plugs
(1 set)
-
Ground pole (1 pc)
-
Cup-shaped electrode for
electric excitation (1 pc)
-
Probe attachment with a
cylindrical electrode for
detection of "meridian
sensitivity" at one end
and a conical head for
acupuncture points detection at
the other ( 1 pc)
-
Monitoring loudspeaker (1 pc)
|
|
|
ES-130 Electro-Acupuncture
Device
Made in Japan - Brand New Model
ES-130 Portable Japanese
Electro-Acupuncture Device
Made in Japan
The all new ES-130 is a compact, lightweight, sturdy,
palm-size, high quality acupuncture device made in
Japan. A Hi/Low switch on the back of the unit
facilities use with needles (low voltage setting) or MEA
electro-acupuncture (Hi voltage setting). Offer 3
independently controlled output channels with adjustable
frequency indicated by flashing light. This unit is not
equipped with a point locator.
Features a unique biphasic pulse form which has been
designed to minimize electr0lysis damage to the needle.
The portable ES-130 is the smallest and smartest looking
professional electro-acupuncture unit in the world, for
use in or out of the office.
Accessories include 3 sets of new CE wire leads with
rectangular CE jack, carrying case, belt clip, 9volt
battery, and instructions.
|

<click>
to enlarge»
***BRAND NEW ITEM!!!***
Our Price:
$299
+ shipping*
|
|
|
Pro Electro-Acupuncture Stimulator - Model WQ 10D1,
AcuPoints Location, Stim & More
The Multiple
Electronic
Acupunctoscope (MEA), Model WQ-10D1 is an
instrument used both as a detector of acupuncture points
and as an electrical stimulator for acupuncture therapy
and anesthesia. The WQ-10D1 model is a newly modified
unit from the older WQ-10 series
acupunctoscope,
featuring a CA (constant amplitude)-AM (amplitude
modulation) selecting switch to allow it to discharge
six different combinations of wave patterns.
Accessories
Includes:
-
Output leads
with clips (3
sets)
-
Output leads
with banana
plugs (1 set)
-
Ground pole (1
pc)
-
Cup-shaped
electrode for
electric
excitation (1
pc)
-
Probe attachment
with a
cylindrical
electrode for
detection of
"meridian
sensitivity" at
one end
and a conical
head for
acupuncture
points detection
at the other ( 1
pc)
-
Monitoring
loudspeaker (1
pc)
|
|
|
|
|

<click> to
enlarge»
Our Price:
$165
+ $20.00 shipping*
|
|
Pointer
Plus Excel II
Electro Acupressure
Device, Hand Held T.E.N.S. and Point Detector with
Digital Display
The Pointer Plus Excel II is the latest and most
advanced user-friendly hand held point locator and
stimulator. Features a built-in, 0.35" x 1.0" LCD
digital display meter for location of acupuncture and
trigger points.
The Pointer Plus Excel unit offers sensitive acu-point
or trigger point location and stimulation. Location and
stimulation are independently adjusted with two separate
control dials.The
Pointer Plus Excel is the latest and most advanced
user-friendly hand held point locator and stimulator.
Features a built-in, 0.35" x 1.0" LCD digital display
meter for location of acupuncture and trigger points.
The Pointer Plus Excel unit offers sensitive acu-point
or trigger point location and stimulation. Location and
stimulation are independently adjusted with two separate
control dials.
This new Pointer Plus Excel device also includes more
advanced features.
- The frequency is
adjustable (1 to 16 Hz) and is also displayed on the
LCD digital display when the stimulation button is
pressed.
- Furthermore, a
polarity reversal switch offers the options of
tonification (-) or sedation (+) treatment.
- A flashing light and
sound indicate when point detection is made.
- The spring activated
detection prove allows a uniform pressure when
searching.
- The grounding
circuit is made by holding the metal plate on the
side of the unit or with the hand grounding pole.
What's Included:
Pointer Plus Excel features two grounding plates on
the unit (allowing use with either left or right
hands) as well as a hand probe with grounding pole
and attached wire. Two probe tips are included with
unit: 2 mm (0.08") and body 4 mm (0.16"). Other
standard accessories include 9 volt battery,
carrying case, and instructions.
Specifications:
- Output channels: one
- Test load: 500 ohms
- Frequency: 1 to 16
Hz
- Frequency meter:
LCD, 0.35"x1.0"
- Volts & current:
Normal dial 0 to 22 milliamps
- Volts & current:
Blue zone 0 to 2 microamps
- Polarity reversal:
+/- by switch
- Pulse width: 220
microseconds
- Pulse shape:
asymmetric biphasic square wave
- Pulse modes:
continuous
- Measures 6.5" x 1.3"
x 0.9"
- Recommended for use
by those experienced in acupuncture or acupressure
therapy.
|

<click> to
enlarge»
Our Price:
$160
+ shipping*
|
|
|
The NEW
***Point
Select***
The
perfect replacement for Stim Plus Pro and Stim Plus II
Point Select
German
engineering "You know the Germans always
make good stuff" - ShamWOW! Guy
Point Select was originally designed and
manufactured by a well-known German company; and named
PointoSelect in Germany. Due to the high labor and
material cost, the manufacturer has moved the factory
overseas where the product is made. Thanks to the German
engineering and high quality control, the device has
kept its original unique design and state-of-the-art
manufacturing standard. It is now called Point Select,
and comes with automatic/manual location of meridians,
and treats acupuncture points on ears and body by using
Gold and Silver LED detection. Point Select treats as a
portable electro acupunctoscope.
Technical data at a glance:
- Power Supply: 9V battery
- Current Consumption: approx. 0.17 mA (without signal
tone), approx. 30 mA (with signal tone)
- Stimulator
- Current consumption: approx. 28mA, (< 20kohm load at
128Hz and 120 us)
- Output voltage: 2-128 Hz
- Pulse width: 60-120 us
- Dimension: 115mm x 60mm x 30mm (4.52 x 2.36 x 1.18
inches)
- Weight: 123 gm (0.27 Lbs)
Note: An informative operation DVD is included with
the device for immediate reference and application. More
information is available upon request.
|

New INTRODUCTORY Price:
$300
+ shipping*
|
|
Acu-Treat
A Practical TCM Kit
includes Probe, Video, Chart, Book & More
Acu-Treat – A Great Tool
for Practitioners and Students of Acupuncture
Features
- Point
location with sensitivity control
- Spring
loaded tip (great for stimulating ear points, etc.)
-
Combination search/treat button for easy operation
-
Variable frequency 1.8Hz to 12Hz
-
Variable intensity controller
-
Reverse polarity button
Kit
includes:
-
Hand-held Electro-Acupuncture device
- A
carrying case
- Probe
with ground
- 9 volt
battery
- User’s
Instruction Guide
- 400
page book “Guide to Acupuncture”
-
Instructional video
- Quick
Reference Chart for Acupuncture Points and Meridians
|

<click> to enlarge»
Our Price:
$225
+ shipping*
|
| |
|
|
|
You may also need one of these herbal
machines: |
|
|
| |
Questions about a grinder?
email inquiry»
|
|
|
*Covers
shipping to Cont. U.S.A only. For shipping to
Hawai'i and Puerto Rico, or for international
shipping, please e-mail us. |
|